Computer PC Power Supply Tester, ATX/ITX/IDE/HDD/SATA/BYI Connectors Powe... New

Description

Computer PC Power Supply Tester, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester, 1.8'' LCD Screen (Aluminum Alloy Enclosure)
Description
Power Supply Tester - Aluminum Alloy Enclosure [8-in-1 ATX Power Supply Tester] -- Support test 20-pin IDE / 24-pin IDE / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors [Aluminum Alloy Enclosure] -- Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance [1.8'' LCD Screen] -- Outputted Voltages shows on the 1.8'' LCD Screen, Easy to Read (The 1.8'' LCD Screen was Powered by 20-pin / 24-pin Connector)[Beep Alarm] -- When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know Operation method: Insert the power 20-pin or 24-pin and P4, P6 or P8 plug into the corresponding position of the power tester. (if Insert the 20pin or 24pin connector, tester alarms and displays “LL”, it needs to plug in 4P connector! Please make sure 4P connector is inserted in 4P position! )Turn on the power supply, at the same time, "didi" sounds twice. If the values of each group do not flash, it indicates that the power input of this power supply is normal.The voltage of IDE / SATA / P6 / P8 interface is displayed by the three lights on the left of the power tester. If their voltage is normal, the three groups of lights (+ 12V, + 3.3, + 5V) will be on. If the light is not on, it indicates that the interface line group is faulty.If the voltage signal of a circuit is not detected (such as 20-pin or 24-pin connector) or the detected voltage exceeds the normal range, the buzzer will send out a warning sound of "di di" for a long time, and the corresponding voltage or PG value display status is flashing state, it means that the power supply is a fault source!Special reminder: The power supply tester is not supported Hot Plug How to judge test results？ The voltage of 20-pin / 24-pin / P4 interface is displayed by the 1.8'' LCD Screen. If their test voltage is exceeds the normal range, the buzzer will send out a warning sound of "di di" for a long time, and the corresponding voltage or PG value display status is flashing state, it means that the power supply is a fault source.The voltage of IDE / SATA / P6 / P8 interface is displayed by the three lights on the left of the power tester. If their voltage is normal, the three groups of lights (+ 12V, + 3.3, + 5V) will be on. If the light is not on, it indicates that the interface line group is faulty. NOTE: The power tester has no battery and is completely powered by 20-pin or 24-pin interface, if there is no 20-pin or 24-pin interface powered, tester screen will not light up and the value cannot be read. The Product Screen Has Scratches？Because the LCD screen is easy to scratch, we put aprotective film on It, if you think It's not beautiful and useless, you can tear it off by yourself. The protective film of the screen fits very well and is not easy to tear off. Please operate carefully to avoid scratching the LCD screen. Please do not plug the interface in the wrong position or reverse, which may cause the power tester to smoke or damage your power supply. Special reminder: not supported Hot Plug, Hot Plug behavior can cause short circuits or other problems Read more Condition: 100% NewColor: BlackMaterial: Aluminum AlloyScreen: 1.8'' LCD ScreenCharacteristics: Beep Alarm when power supply was problemItem Dimensions: 4.9'' x 2.6''x 0.63''Item Weight: 3.1 ounces Package Includes:1x Power Supply Tester - Aluminum Alloy Enclosure
Features:
[8-in-1 ATX Power Supply Tester] -- Support test 20-pin IDE / 24-pin IDE / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors
[Aluminum Alloy Enclosure] -- Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance
[1.8'' LCD Screen] -- Outputted Voltages shows on the 1.8'' LCD Screen, Easy to Read ( The 1.8'' LCD Screen was Powered by 20-pin / 24-pin Connector ), Note: The Product Screen Has a Load of Scratches All Over It?Because The Screen is Easy to Scratch, We Put a Protective Film on It, If You Think It's Not Beautiful, You Can Tear It Off by Yourself
[Beep Alarm] -- When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know
NOTE: The voltage of IDE / SATA / P6 / P8 interface is displayed by the three lights on the left of the power tester. If their voltage is normal, the three groups of lights (+ 12V, + 3.3, + 5V) will be on. If the light is not on, it indicates that the interface line group is faulty
Product Details:
Product Dimensions: 4.9 x 2.6 x 0.63 inches
Item Weight: 3.1 ounces
Manufacturer: Fuhengli
Item model number: PC - PSU Tester
Is Discontinued By Manufacturer: No
Date First Available: September 12, 2017
Customer Commitment
We are committed to ensuring your shopping experience with us goes above and beyond. Each order will arrive brand new in its original factory sealed packaging. We use a variety of authorized distributors and fulfillment centers all over the country, which means your order should arrive promptly, regardless of where you live. If for any reason you are not satisfied with your order, please don't hesitate to contact us - we will make it right.
Factory Direct Shipment
Our products ship from several warehouses located throughout the country, which allows us to provide the quickest possible delivery to our customers. Most orders are shipped within one business day with EXPEDITED shipping. Tracking information will be automatically uploaded as soon as the item has been shipped. Please make sure to provide the correct shipping address during checkout as the address cannot be changed after checkout. Since orders are processed immediately after payment and ship very quickly, orders cannot be canceled after checkout. We do not ship to AK, HI, PO boxes, APO addresses, or freight forwarders. Please be aware that all electronic items are designed for the United States (110V). Use outside the United States requires proper conversion to the local volt/hertz system.
Return Policy
Returns are accepted on most NEW and UNUSED products within 30 days of delivery. All returns must be requested through the eBay Return Request process (Do not email, message, etc.) for return authorization and shipping address. Never send a return without opening a return request, as the return address is different from the source address. Items must be returned in the condition they arrived, and with all packaging, UPC code, accessories, product documents, etc. Open software, music, games, movies, personal hygiene products, foods, supplements, and other consumable items are not eligible for returns. Return shipping will be paid for by the SELLER. A 20% restocking fee will apply to all returns except those that are the fault of the seller. Original shipping charges will not be refunded.